Smaller Footprint
Simple Operation
Energy Saving Labor
Environment Protection
Static Drying
No Damage to Material Appearance
Brief Introduction:
1. Options of heat source: steam, electricity, or far infrared, or both steam electricity.
2. Drying temperature: steam heating 50-130 ºC , Max.140 ºC .
3. Electricity and far infrared:50-300 ºC .Automatic control system and computer control system on request.
4. Commonly used steam pressure 0.2-0.8Mpa(2-8 bar).
5. The ovens and baking trays made by our factory are uniform in dimensions, and can be exchanged each other.
6. Baking plate dimensions:460*640*45mm.
Characteristics:
1. The hot air circulates in the oven with high thermal efficiency and energy saving.
2. By using the forced ventilation function, the air duct is set in the oven, and the materials are dried evenly.
3. The oven runs smoothly. Automatic temperature control, easy installation and maintenance.
4. It can be used to dry all kinds of materials. It is an ideal general drying equipment.
5. It belongs to static drying and will not damage the material appearance
Application Fields:
| Hot air circulation oven is used for heating, curing, drying and dehydration of materials in chemical industry, food, agricultural and sideline products, aquatic products, light industry and other industries. Such as plants, herbs, extracts, powders, granules, dehydrated vegetables and fruit, etc. |
 |
The air circulation system of the hot air circulation oven adopts the mode of fan circulation and air supply, and the air circulation is uniform and efficient. The air source is driven by the circulating air supply motor (using contactless switch) to drive the air wheel through the heater, and then the hot air is sent out, and then through the air duct to the inner chamber of the oven, and then the air after use is sucked into the air duct to become the air source for re circulation and heating. Ensure indoor temperature uniformity. When the temperature value swings due to the opening and closing action, the air supply circulating system will quickly resume the operation state until the set temperature value is reached.
CT-C series hot air circulation oven uses a low noise and high temperature proof axial flow blower and an automatic temperature control system. The whole circulation system is the fully enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efficiency can be up to 50%. The successful design of CT-C hot air circulation oven makes that the hot air circulation drying oven in our country reach the advanced level in the world. It saves energy and increases the economic benefit.
| Model |
Field standard model |
Evaporation area(m2) |
Efficiency volume (m3) |
Drying capacity (kg/lot) |
Steam consumption (kg/h) |
Radiator area(m3) |
Electric heating power(kw) |
|
| CT-C-0 |
RXH-5-C |
6 |
1 |
40 |
8 |
8 |
6 |
| CT-C-I |
RXH-14-C |
14.1 |
2.6 |
120 |
18 |
20 |
15 |
| CT-C-IA |
RXH-7-C |
7.1 |
1.3 |
60 |
10 |
10 |
9 |
| CT-C-II |
RXH-27-C |
28.3 |
4.9 |
240 |
36 |
40 |
30 |
| CT-C-IIA |
RXH-27A-C |
28.3 |
4.9 |
240 |
36 |
40 |
30 |
| CT-C-III |
RXH-41-C |
42.4 |
7.4 |
360 |
60 |
80 |
45 |
| CT-C-IIIA |
RXH-41A-C |
42.4 |
7.4 |
360 |
60 |
80 |
45 |
| CT-C-IV |
RXH-54-C |
56.5 |
10.3 |
480 |
80 |
100 |
60 |
| CT-I |
RXH-14-B |
14.1 |
2.6 |
120 |
20 |
23 |
15 |
| CT-II |
RXH-27-B |
28.3 |
4.9 |
240 |
40 |
48 |
30 |
| CT-III |
RXH-41-B |
42.4 |
7.4 |
360 |
60 |
72 |
45 |
| CT-IV |
RXH-54-B |
56.5 |
10.3 |
480 |
80 |
96 |
60 |
| Model |
Fan volume (m3/h) |
Fan power (Kw) |
Dimension (mm) |
Equipped drying cart (set) |
Equipped barking plate(pc) |
Temperature auto. Control box |
Total weight |
|
| CT-C-0 |
3450 |
0.45 |
1380x1200x2000 |
1 |
16 |
Available |
820 |
| CT-C-I |
3450 |
0.45 |
2260x1200x2000 |
2 |
48 |
Available |
1580 |
| CT-C-IA |
3450 |
0.45 |
1380x1200x2000 |
1 |
24 |
Available |
820 |
| CT-C-II |
6900 |
0.45x2 |
2260x2200x2000 |
4 |
96 |
Available |
1800 |
| CT-C-IIA |
6900 |
0.45x2 |
4280x1200x2270 |
4 |
96 |
Available |
1880 |
| CT-C-III |
10350 |
0.45x3 |
2260x3200x2000 |
6 |
144 |
Available |
2100 |
| CT-C-IIIA |
10350 |
0.45 x3 |
3240x2200x2000 |
6 |
144 |
Available |
2210 |
| CT-C-IV |
13800 |
0.45x4 |
4280x2200x2270 |
8 |
192 |
Available |
2800 |
| CT-I |
3450 |
1.1 |
2480x1200x2375 |
2 |
48 |
None |
1220 |
| CT-II |
5320 |
1.5 |
2480x2200x2438 |
4 |
96 |
None |
1530 |
| CT-III |
9800 |
2.2 |
3430x2200x2620 |
6 |
144 |
None |
2110 |
| CT-IV |
11800 |
3 |
4460x2200x2620 |
8 |
192 |
None |
2300 |
Our Services:
Pre-Service:
1. 24 hours online consult and service
2. Introduce the product to the customer in detail, answer the question raised by customer carefully;
3. Make different plans for choice according to the needs and requirements of customers;
After-sale Service:
1. Help to install and debug the equipment;
2. Provide 24 hours technical support by e-mail or phone;
3. Keep sufficient replaceable spare parts;
4. Help customers solve any other questions about products or other aspect;
5. Establish long-term and friendly relationship.
Service Commitment:
1. We will provide one-year warranty period to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
2. Consultant services for whole machine life, 24 hours technical support by email and telephone.
3. Send technicians to the job site for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
LIAOYANG WANDA MACHINERY CO.,LTD is specialized in design, development, manufacture and sale of industrial, chemical drying machinery. Our products include Hot air circulation oven dryer, Vibration fluid bed dryer, Spray dryer, Belt dryer, Paddle dryer, Rotary dryer, Vacuum oven dryer, Powder and Granulator Packing machine and so on.
Looking to the future with a commitment to design innovation and quality products, supported by an outstanding level of customer service. The unexcelled quality machines can be easily obtained from us because we maintain the quality and standard of our products from incoming raw materials to the finished products. Our company follows strict quality controls and various systematic procedures. We take utmost care of quality at every stage of the manufacturing process.
Our research and development wing is our asset that develops and incorporates innovative ideas and products. Our Team is full of experienced and qualified professionals, who have sound knowledge about the quality of our machines. Our products are far sold to Europe, U.S.A., and the southeast Asia. They are well received by customers both at home and abroad.
1. What data is required to confirm the model?
(1) Materials to be dried (2) Treatment capacity per hour (3) Moisture requirements before and after drying
2. What certificates do you have?
We can provide CE, ISO 9001, etc.
3. What is the warranty period of the equipment?
Normally 1 year warranty.
4. Can we visit your factory?
Of course, we sincerely invite you to visit. If it's not convenient for you, we can also arrange teleconference video.
5. Can we bring our own materials to your factory for experiments?
Of course, you are welcome at any time. We will arrange professional engineers and technicians to do experiments and analyze data for you on site. You can also send your materials directly to our factory.
6. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
7. How long is the construction period?
It's about 30 working days, but it also needs to be determined according to the specific equipment model, order number, etc., But if you need it urgently, please let us know, we can arrange the factory to rush production.
8. Will you provide installation services?
If you need, we can arrange professional technicians and engineers to install and debug on site.
){kind=link}